Datasheet:Extruder |
 |
Model: ABC 600 |
 |
Datasheet:Extruder |
|
Model: ABC 600 |
|
Full fat soya |
500* – 600** kg/hr |
Dogfood |
600*– 800** kg/hr |
Maize or sorghum |
400* – 600** kg/hr |
| Fishfood | 300*– 500** kg/hr |
Corn/Soy Blend |
500 – 600kg/hr |
*Capacity is dependent on formulation, size of motor, application of steam.
Main motor |
55* – 75** kW |
Motor RPM |
1460RPM |
Volumetric feed motor |
0.75kW |
| Feed adjustment | Variable speed gearbox / Inverter |
| Outboard cutter and motor (Optional) | 1.5kW |
| Barrel overhang | ±600mm |
| Height of product at exit | ±560mm |
| Hopper size | 50kg |
| Extrusion temperature (soya) | ±1400C Barrel ±1150C Product |
Compression head Middle chambers |
600mm and 300mm chambers |
All motors are 3 phase 380V Volt, 50 Hz unless otherwise indicated
| Screw flights |
| Choke plates |
| Wear sleeves |
| Nose cone |
| Chambers |
| Width | 1200mm |
| Length | 1600mm |
| Height | 1700mm |
| Mass | 1,100kg. |
The average cost per ton for wear parts is approximately US$1 – 2.