window.location.href="http://www.scanwood.co.za/woodchippers.html"; TP 200 TP 200 is a very efficient wood chipper suitable for a wide range of applications It is available in two variants either for tractor mounting or trailer mounted with it's own engine 540 rpm Speed-up gear From 540 to 1000 rpm. The speed-up gear can be used to increase the capacity of the wood chipper, if the tractor PTO shaft only operates at 540 rpm. The speed-up gear is mounted on the wood chipper. Overload protection system The system monitors the speed of the rotor, it automatically starts/stops the in feed rollers and controls the revolutions of the rotor. The system protects the engine from overloading , thus enabling the operator more time to handle in feeding. Sliver breaker Filled to the rotor the sliver breaker ensures that all chips are processed uniformly essential for chips being used in heating systems. Transport Set A transport set consists of a wheel set and drawbar with towing eye for coupling to a tractor. The set is intended for use if the tractor is not large enough to lift the wood chipper. It can tow the wood chipper using towing eye. Trailer hitch Mounted on the wood chipper for use with a 4-wheeled trailers. Vertical ejector spout extension 500 mm Horizontal ejector spout extension 1500 mm TP 200 PH: for tractor mounting. 3 - point linkage mounting. Funnel - parallel. TP 200 VHM: on trailer with engine. Chipper, as TP 200 PH. Hatz diesel engine. Galvanized trailer with over-turning brakes. Manual clutch between engine and wood chipper. TPP 200 DHM: on trailer with turntable. Equipment as TP 200 VHM. The trailer is with twin axel. http://www.abchansenafrica.co.za/Datasheets/Chipper1.jpg